|
 |
| 1. |
Do I need to apply a layer of basecoat? |
| |
No, AQMORE’s water-based nail enamel may used directly on the nail surface, without any basecoat, as it has been specially designed to be gently on your nails. |
|
| 2. |
How many layers of enamel should I apply? |
| |
It is recommended that you apply at least 2 layers of the enamel for a full-bodied color. |
|
| 3. |
How long does it take for each layer of enamel to dry? |
| |
Approximately 1 minute, depending on the thickness of the coat and humidity.
Tips: To prevent bubbles from appearing on the nail surface, apply multiple thin coats of color, instead of one thick coat, so as to allow the color to dry quickly and evenly.
Tip: To prevent bubbles from appearing on the nail surface, apply multiple thin coats of color, instead of one thick coat, so as to allow the
color to dry quickly and evenly. |
|
| 4. |
How do I ensure that the nail color lasts? |
| |
To ensure optimal product performance, AQMORE’s water-based nail enamels MUST be used together with AQMORE’s protective top coats, to seal in the nail color and prevent it from peeling easily. Once protected, the nail color can last from 5 days or more, depending on the kind of the activity that it is exposed to.
Note: It is not advisable to leave the nail color on for more than 1-2 weeks, as the excessive lost of moisture may cause the color to
be difficult to peel off or any dryness on your nail. |
|
| 5. |
How many layers of topcoat should I apply? |
| |
It is recommended that you apply at least 2 layers of topcoat to seal in the nail color.
Tip: To prevent the nail color from chipping at the tips, apply the topcoat over the edges your nails, as well as slightly underneath the nail surface to seal in the color.
Tip: To prevent the nail color from chipping at the tips, apply the topcoat over the edges your nails, as well as slightly underneath the nail
surface to seal in the color. |
|
| 6. |
How long does it take for each layer of topcoat to dry? |
| |
Approximately 2 to 3 minutes, depending on the thickness of the coat and humidity. |
|
| 7. |
How long does it take for the enamel and top coat to set? |
| |
Approximately 30 minutes to an hour, depending on the thickness of the coats. |
|
| 8. |
Can I use other brands of topcoats instead? |
| |
No. To ensure that the peel-off removal works, AQMORE’s water-based nail enamel must be used with the AQMORE line of topcoats.
The lastingness of the nail color cannot be guaranteed if you seek to use other brands of topcoats.
Tip: You may consider using AQMORE’s glitter topcoats over your conventional nail polishes for different color effects; the only difference
is that you would still need to use nail polish remover to clean off the enamel, instead of peeling it off. |
|
| |
| |
| |
